- Silicon light sensor
- Custom designed sealed relay
- MOV rated for 320 Joule/9500 Amp
- Neoprene base gasket has a continuous use temperature of 105℃
- Built in 2-5 second turn-off delay
- Polypropylene cover
- Brass legs
- Not approved for use on LED fixtures
- Regulatory listings: ANSI C136.10-1996 Compliant and ROHS compliant
- Inverse ratio controls: ideal for areas where it is important to turn on lights early but energy costs are a concern. Turn off level is lower than turn on level
- Fail off controls: used to decrease the risk of a day-burning fixture
- Power-up delay: this option prevents the control from activating for 45-60 seconds after power is applied. This allows lamp warm-up time so the installer can verify the system is working properly. It also allows for the system to be easily tested in the future. When power is shut off and then reconnected (at the pole base) and the lamp turns on briefly and then turns off, it confirms that the control, fixture, lamp and voltage supply are working correctly
Silicon light sensor photoelectric control c/w locking socket
Product Features
Product Specifications
| Input voltage | 105 – 305 VAC |
| Load rating | 1000 watts, 1800 VA ballast |
| Turn-on level (ftc) | FAA |
| Time delay | 2 – 5 second turn-off delay 320J |
| Surge protect | 9500 Amp MOV |
| Dimension |
80mm(W) x 220mm(H) x 80mm(D) Note: The height is including aluminium mounting bracket |
| Weight | 300 g |
